– Additional investment of US$200 million;
– Medium-term capacity of 9,000 tons per year Moses Lake to become the world’s largest carbon fibre plant;
– Workforce in Moses Lake to be stepped up to 200.
Moses Lake –—- Due to the high demand for carbon fibre in automotive production, SGL Automotive Carbon Fibres is going to triple the capacity of the carbon fibre plant in Moses Lake, WA (USA). This has been announced by the joint venture partners, SGL Group and BMW Group, at the groundbreaking ceremony for the planned site expansion. The expansion will be funded by an investment of US$200 million, in addition to the previously invested US$100 million. The site expansion, scheduled to be completed by early 2015, will make the plant in Moses Lake the world’s largest carbon fibre plant. With the anticipated creation of 120 new jobs, the headcount at the joint venture in Moses Lake is going to rise from currently 80 to about 200 people. Due to the automated production processes, the expansion of the site in Moses Lake will make it possible for the BMW Group to apply carbon fibre material also in other model series in the future, at competitive costs and in large quantities.
At present, the Moses Lake plant operates two production lines, exclusively for BMW i, with an annual output of approx. 3,000 tons of carbon fibre. Already this summer, SGL Automotive Carbon Fibres will commission a third and fourth production line in Moses Lake, which are currently being built, thus doubling the plant’s capacity to 6,000 tons per year. Today’s groundbreaking ceremony for a fifth and sixth production line has been the first step toward tripling capacities to 9,000 tons annually in the medium term. The energy needed for the carbon fibre production is fully generated from hydropower.
“With its highly automated carbon fibre production and stringent quality standards, Moses Lake is setting new standards in the industry. At present, the site is the world’s fastest growing carbon fibre producer. Together with the BMW Group, we are doing pioneering work to establish CFRP as a material in large-series automotive production. In a mix of materials, CFRP offers new opportunities in lightweight construction for an eco-friendly mobility,” explained Dr. Jürgen Köhler, CEO of SGL Group.
Dr. Klaus Draeger, Board Member Purchasing and Supplier Network at BMW AG: “CFRP is a key material for the automotive industry of the 21st century. In our endeavour to identify increasingly lightweight materials in order to reduce a vehicle’s weight and thus its fuel consumption and carbon emissions, this material plays a crucial role. As part of an intelligent mix of materials, we will apply carbon also beyond our BMW i and BMW M models in the future. Thanks to the pooling of the SGL Group’s expertise and our knowledge in large-series production of CFRP components, we will be able to produce the ultra-lightweight high-tech material also for other model series, at competitive costs and in large quantities.”
The carbon fibre plant in Moses Lake is a key element in the strategy pursued by the two companies, which anticipates the industrialised large-series production of carbon fibre reinforced plastics (CFRP) for the application in future vehicle concepts. Up to now, carbon fibre produced in Moses Lake is exclusively used for the BMW i models. Since the start of the year, the Leipzig plant has built over 5,000 BMW i3 vehicles. At present, the production output stands at 100 units a day. Furthermore, the BMW Group has been applying the ultra-lightweight high-tech material also in its BMW M models for the past ten years.
Andreas Wüllner, CEO of SGL Automotive Carbon Fibres: “In the course of only four years, SGL Automotive Carbon Fibres has managed to become the world’s largest carbon fibre production site. The automotive industry will increasingly turn to CFRP because it is a material of the future.”
Availability of renewable energy crucial in the decision for the location in Moses Lake. As part of their joint venture agreement, the BMW Group and the SGL Group invested an initial 100 million dollars at their Moses Lake site by 2013, creating 80 new jobs. Jay Inslee, Governor of Washington State: “Congratulations to the BMW Group and the SGL Group on the groundbreaking of their fifth and sixth production line at the Moses Lake Plant. Washington State is proud to partner with BMW. The game-changing technology of carbon fibre is driving a surge in U.S. manufacturing, and with this production plant Washington State is at the forefront of that surge.”
The production of carbon fibre requires a great amount of energy. Accordingly, decisive factors for the set up of the carbon fibre plant in Moses Lake included the availability of renewable hydropower as well as competitive energy costs in Washington State. The availability of skilled workers also had an influence on the decision in favour of the location, which was taken in April 2010. The groundbreaking ceremony for the plant was in July 2010, the opening of the production site in September 2011.
Dr. Jörg Pohlman, CEO of SGL Automotive Carbon Fibres: “We received great support from the regional authorities in Grant County and Moses Lake, a decisive element in making this rapid development of the past few years possible. With the site expansion, we are reaching an important milestone in safeguarding the site’s future.”
Production of carbon fibre composites.
The production of carbon fibre composites for automotive manufacturing requires several process steps: The necessary precursor, which is based on polyacrylnitrile fibre, is made by a joint venture between SGL Group and the Japanese company Mitsubishi Rayon in Otake, Japan. In a next step, polyacrylnitrile fibre is turned into the actual carbon fiber in Moses Lake. This material is then processed at the second joint venture site in Wackersdorf, Germany, and turned into textile carbon fiber layers, the starting point for the production of CFRP body parts at the BMW plants in Landshut and Leipzig. In the BMW i models, CFRP already holds a significant share in the mix of materials, a first at this scope and in series production. The joint venture gives the BMW Group access to this innovative key material in the long term. The SGL Group provides their expertise in high-performance materials and their experience with carbon fibre-based materials.
SGL Group – The Carbon Company
SGL Group is one of the world’s leading manufacturers of carbon-based products and materials. It has a comprehensive portfolio ranging from carbon and graphite products to carbon fibres and composites. Products from SGL Group are used predominantly in the steel, aluminium, automotive and chemical industries as well as in the semiconductor, solar and LED sectors and in lithium-ion batteries. Carbon-based materials and products are also being used increasingly in the wind power, aerospace and defence industries.
With 44 production sites in Europe, North America and Asia as well as a service network covering more than 100 countries, SGL Group is a company with a global presence. In 2013, the Company’s workforce of around 6,300 employees generated sales of €1,477 million. The Company’s head office is located in Wiesbaden.
SGL Automotive Carbon Fibres
SGL Automotive Carbon Fibres (ACF), a joint venture between the BMW Group and SGL Group was founded in 2009 for the exclusive supply of carbon fibre materials to the BMW Group. SGL Automotive Carbon Fibres is setting new standards with their sustainable and cost-effective production and positioning the BMW Group to be the first automotive manufacturer to use carbon fibre reinforced plastic (CFRP) in series production. The carbon fibre materials, which are used in the passenger compartment of the BMW i models, will allow an entirely new vehicle designs. SGL Automotive Carbon Fibres expertise means that the vehicles will be significantly lighter while ensuring the highest safety. SGL Automotive Carbon Fibres has two production sites. In Moses Lake, WA/ USA carbon fibres spools are produced that are processed into fabrics at the second production site in Wackersdorf/ Germany. Moses Lake has a workforce of 80 employees and Wackersdorf a workforce of 150 employees.
The BMW Group
The BMW Group is the leading premium manufacturer of automobiles and motorcycles in the world with its BMW, MINI and Rolls-Royce brands. As a global company, the BMW Group operates 28 production and assembly facilities in 13 countries and has a global sales network in more than 140 countries. In 2013, the BMW Group sold approximately 1.963 million cars and 115,215 motorcycles worldwide. The profit before tax for the financial year 2013 was € 7.91 billion on revenues amounting to approximately € 76.06 billion. As of 31 December 2013, the BMW Group had a workforce of 110,351 employees. The success of the BMW Group has always been based on long-term thinking and responsible action. The company has therefore established ecological and social sustainability throughout the value chain, comprehensive product responsibility and a clear commitment to conserving resources as an integral part of its strategy.
[Source: BMW Group]